SV38V – Seat Accelerometer
SV38V Seat Accelerometer is a triaxial Whole-Body seat accelerometer based on MEMS transducers dedicated to SV106 instrument for Human Vibration measurements according to ISO 2631-1 requirements both on a seat pad or seat back.
The SV38V uses low voltage and consumes much less energy than IEPE accelerometers extending battery life time of SV106 instrument. The built-in TEDS memory stores information about the accelerometer sensitivity that is automatically transferred to the SV106 vibration analyser helping to avoid configuration errors.
A full ISO 8041 in-situ calibration check for before and after measurement is possible using the SV111 portable vibration calibrator.
Features:
- Meets ISO 8041 and ISO 2631-1
- Dedicated to SV106
- Low-power consumption
- Robust technology
- TEDS memory
- Low price
Performance: |
|
Number of axis | 3 |
Sensitivity (± 5 %) | 50 mV/ms-2 at 15.915 Hz, HP1 |
Measurement range | 0.01 ms-2 RMS ÷ 50 ms-2 PEAK |
Frequency response | 0.1 Hz ÷ 125 Hz |
Resonant frequency | 5.5 kHz (MEMS transducer) |
Electrical noise | < 230 μV RMS, HP1 weighting |
Electrical: |
|
Supply current | < 5.0 mA |
Supply voltage | 5.2 V ÷ 16 V |
Bias voltage | 2.5 V ± 0.05 V |
Output impedance | 51 Ohms |
Charge/discharge time constant | 30 sec. typ |
TEDS memory | installed (power supply pin) |
Environmental Conditions: |
|
Maximum vibration | 100 000 ms-2 shock survival for MEMS |
Temperature coefficient | <+/-0.02 %/°C |
Temperature | from -10°C to +50°C |
Humidity | up to 90 % RH, non-condensed |
Physical: |
|
Sensing element | MEMS |
Cable | integrated 1.4 meters |
Connector | LEMO 5-pin plug (SV 106 compatible) |
Dimensions | 236 mm diameter; thickness from 3.6 mm to 12 mm |
Weight | 550 grams (including cable and cushion) |
Accessories: |
|
Calibration adapter | SA 38 (option) |
*Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice.